Name 

Description 

Adding MP3 And WMA Files 

The wizard page where you can add files to your project follows the same principle regardless of the project you perform.

The "Disc Content Editor” screen is split into two parts. Use the Explorer Window at the top to navigate and locate the folders containing the files to be recorded. The window at the bottom contains the files to be written to the disc. Once you select the files, the toolbar between both windows ("Add" and "Remove" Files buttons) will be activated.

Steps to add files to a disc:

Before adding the files to the compilation, navigate to the place... more 

Advanced Settings 

The “Data Image Setting” screen enables you to specify the "Disc Title" and the "Image type", as well as some advanced recording features.

Volume Label

We suggest that you change the “Volume Label” so you can recognize easily the disc title when you load it on your computer. Spaces and special symbols are not allowed in the disc title.

Image Type

For creating an MP3/WMA discs - ISO 9660 image type is only available.

Advanced Options

To configure the ISO level name and caching small files, press the “Advanced” button. When you finish setting up, press the “OK” button.

Note:... more 

Burning Settings 

 

SwiftDisc Burning Wizard allows you to configure the burning settings for your project.

In case you selected multiple devices (available only for the Premium Edition), you can access each device from the drop-down list at the top of the window.

Parameters:

Speed

Choose the recording speed from the "Recording speed" drop-down list. The recording speeds available depend on the drive capabilities and the media inserted in the drive.

Hint: We suggest that you select a lower-than-maximum speed.

Simulation

Check the "Simulate" check box to perform a simulated burn. Make sure that you have inserted the CD/DVD to be used for... more 

Advanced Burning Settings 

The “Advanced Burning Settings” screen allows you to set up the session type for the recording. It is an optional, additional screen. To activate it, check the “Edit Advanced Settings” check box on the “Burning Settings” screen and press the “Next” button.

Session Type:

The options "Session At Once" and "Track At Once" determine how the project will be recorded.

Note: "Disc At Once" and "Incremental" are the options available for DVD discs.

"Session At Once"

If the "Session At Once" (or "Disc At Once") option is selected, the entire project will be written at once without interruptions.

Hint: If... more 

Burning Music Disc Projects 

 

=> Press the “Finish” button to initiate the burning process.

After the actual burning has been initiated, you will be directed to the "Progress screen". The burning process will take some time, depending on your hardware and the amount of data to be recorded. Please wait until the burning process is finished. Select a device to review the progress of burning on a particular disc, elapsed time, estimated time to complete the recording and the recorder buffer level. For further actions, choose an option depending on the device status, e.g., retry the recording/erase the disc.
When the recording is over... more