Name 

Description 

Load ISO File 

To perform the "Create Data Disc from ISO file" project, you need to select the ISO image file which you would like to record.

Steps to load an ISO file:

1. Navigate to the “Select ISO Image” screen.

2.a. Press the "Browse" button to select the file. Confirm your selection by pressing the "Open" button. Once you have selected a valid ISO file, the "Next” button will be enabled.

2.b. Alternatively, you can drag and drop an ISO file from a Windows Explorer window into the field to the left of the "Browse" button.

3. Press the “Next” button to... more 

Burning Settings 

SwiftDisc Burning Wizard allows you to configure the burning settings for your project. In case you selected multiple devices (available only for the Premium Edition), you can access each device from the drop-down list at the top of the window.

Parameters:

Speed

Choose the recording speed from the "Recording speed" drop-down list. The recording speeds available depend on the drive capabilities and the media inserted in the drive.

Hint: We suggest that you select a lower-than-maximum speed.

Simulation

Check the "Simulate" check box to perform a simulated burn. Make sure that you have inserted the CD/DVD to be used for... more 

Advanced Burning Settings 

The “Advanced Burning Settings” screen allows you to set up the session type for the recording. It is an optional, additional screen. To activate it, check the “Edit Advanced Settings” check box on the “Burning Settings” screen and press the “Next” button.

Session Type:

The options "Session At Once" and "Track At Once" determine how the project will be recorded.

Note: "Disc At Once" and "Incremental" are the options available for DVD discs.

"Session At Once"

If the "Session At Once" (or "Disc At Once") option is selected, the entire project will be written at once without interruptions.

"Track At... more 

Burning Data Disc Projects 

=> Press the “Finish” button to initiate the burning process.

After the actual burning process has been initiated, you will be directed to the "Progress screen". The burning process will take some time depending on your hardware and the amount of data to be recorded. Please wait until the burning process is finished. Select a device to review the progress of burning on a particular disc, elapsed time, estimated time to complete the recording and the recorder buffer level. For further actions, choose an option depending on the device status, e.g., retry recording/erase the disc.

Burn ISO Image

For the... more